You Might Ask

So, why am I posting about building in my blog about writing? Hey, I AM writing! I'm writing the blog. It's all good, right?

Besides, the office is going to be my writer's den when finished, or at least that is the plan. Here at my desk in the living room it is often impossible to hear myself think or work without interruption. Since we have the weather for it, I'm balancing my days between the re-construction of the trailer and the new garden, which, by the way is going well. I'll post new pics of that soon.
Thanks for asking!
  

Update on The RainCrow Writing Cave

We've had some really nice weather for working on my office trailer project. We definitely need rain badly, but it would not necessarily be a good  thing while the wall of the trailer is wide open. However, I could put up with some.
Anyway, I've been moving right along.

Shown is the front end of the trailer. (Front being where the hitch is.) This end will most likely wind up being more for storage eventually. It may look as messy as before, but actually it has been cleaned up. What you're seeing is my scavenged building material ready to use in re-building. The end window was really not fixable. I have to totally re-frame the area around one window on the wall to our right, so I re-located that good window to the end. The (also scavenged) extra windows I have are of a different size. Since I'm re-framing anyway, I will frame it to accept the different size window. I'll have to finagle the exterior skin some, but that will be minor.

 This next series shows what remains after demolition of the bad wood and removal of the outside skin and insulation. A lot of the insulation is still usable. The door has also been removed, as the supporting board running beneath the floor has to be replaced as well as one of the jambs. The metal pan looking area is a sort of fender well for the wheels below. I assume it was to keep the wheels from throwing water and dirt up onto the floor above. I left it intact.

Outside view of the same area with the outside floor joist and rotten portion of the floor removed.

 Another exterior shot of demolition. Rotted wood and bad paneling are piled on the ground outside. Here you can see where the door was removed.

I replaced the outside floor joist 2x6 along with some judicious splicing. Here it is already attached.

 An outside shot of the new floor joist 2x6. This acts as floor frame and also supports the wall. There are metal braces below that attach it to the steel trailer frame.

Here is some of the new floor framing. 2x4 cross pieces were cut and inserted at about two foot spacing. The old flooring was cut even with the next existing 2x6 floor joist. A new 2x4 was added as a cleat against the existing joist to give something to attach the new strip of plywood to. In the upper right corner you can see one of the new floor pieces. I suspect you give up a bit of strength doing this. The floor was originally one sheet of plywood continuous across the width. That continuous piece gives it a membrane effect. To replace the whole floor would involve rebuilding the entire trailer from ground up. I don't have time, energy, or money for that. This will have to do.

Here both new sections of flooring have been attached and screwed to the floor joists. A note here, I've done this sort of thing on several mobile homes now and I've never once found one with a "standard" thickness of flooring. Fortunately, I had a piece of floor decking (also scavenged) that was pretty close to the same thickness. The new wall framing is also visible in this picture.

 New wall framing in place. To be consistent with the existing style of framing, a 1x2 runner was added along the top of the floor edge and new 2x2 verticals added to duplicate the original locations. One vertical stud had to be slightly relocated to accept the replacement window that, again, is of a different size.

 Verticals are notched on the outside to accept the horizontal 1x3's as well as the existing wiring. The skin will attach to the horizontals, while the inside paneling attaches to the vertical studs.

All the new framing for this wall is done. We're ready to screw the skin back on, insert the window, do insulation and inside paneling.


I'm not sure how feasible this project would be without having all the scavenged lumber available. So far we've only been out the moving fee for the trailer. All the lumber has come from scrap piles at other vendor's booths out at the Sherwood Forest site. The windows, paneling, and other material came inside this free trailer or the portable office building we were given that we now use as woodworking shop. (See previous post.)


More to follow soon!
 
 

Next Big Project

Okay, we have a hiatus of sorts. Sherwood Forest Faire has ended for this year. We won't be able to continue work on our booth for perhaps a month. The powers that be at Sherwood must spend some time doing their own thing before they let us back in to work on our thing. We're hoping they let us in at least to water our flowers. 


So, I'm back on the hunt for employment and in the meantime helping Cat with her art (and my own). Also, since we have good weather and cool mornings, I'm jumping into the renovating of my office trailer. 


To re-iterate what I've posted before, when we started building our booth out at Sherwood, there was an old portable office and an even older office trailer out there. One of the owners let me have them both on the condition I would haul off all the stuff that was in them as well. That was actually a good deal, as there was a lot of good building material and other useful stuff stored there. Some of the material has actually been used in our booth, and the portable building has already been converted into a workshop for Cat and I. Previously she'd had a tarp covered portable carport to work under in the back yard, now we have a reasonably weather tight building with room for Cat's intarsia space in one end, stained glass work space in the other, and my own workbench for flutes etc. along one wall. 


Notice I didn't say "ample" space, but it is very good for now, and most of the time we can expand out under the trees to do some things if we need to.  The landlord was kind enough to allow us space to put it all, on the condition everything goes with us when we move. 


It took a bit longer to move the office trailer, almost a year, in fact. A lot of the material from the portable we shifted to the trailer so we could move the portable, and it stayed there. It was relatively dry and secure and out of the way. As I said, some of it was used on the booth anyway, so it was close to where it ended up. We finally cleared the trailer mostly out and I contacted a mover. 


It was a bit of a challenge. I had to locate four mobile home tires for it, since the old ones had rotted. The basic metal frame on the trailer was in good shape. Some of the wooden wall framing, however was not. I would estimate a third of the wood framing is rotted out. The floor is mostly good except a few places near the walls. One rear corner has to be re-framed, some work needs to be done on a front corner, and the lower part of one side wall and the attached floor near the door must be replaced. Fortunately all the metal skin is intact, if loose in places, and the windows are mostly good with only a few broken panes.


For moving we wrapped the walls with towing straps and come-alongs to keep it all together. It was a sixteen mile move to our place and we did have to stop and re-adjust things once. A couple of times we wondered if we were going to make it, I admit, but we did. In the following weeks I leveled it and blocked it up. 


Now the work starts in earnest.

Here's the beast as it sits. Obviously before I finish it will need some paint as well.

 Loose sheet metal near the door. You can see part of the "Highland Mall" printed on the side. This trailer once was a movable showroom for Lowrey Organs. I actually remember seeing it parked outside one of the malls.

The back corner that is rotted. The wood framing will get replaced. As you can see, the metal is intact. If I'm careful it should not be too hard to re-attach after the framing is done.

An inside shot of the corner to re-frame. And, some of the stuff that still needs to be cleared away.

Inside the side wall that needs work.

A plus. Since it was a showroom for electric organs, I have plenty of fluorescent fixtures and wall plugs with a really good breaker box.

Another plus. A working 110 volt window unit a/c. Huzzah!

And still another plus. It looks like a mess, and I did have to clear it out, BUT, what you're looking at is more than enough sound lumber and paneling to make the repairs I need to make. I may only have to buy nails and screws. I have my fingers crossed on that score.

I really didn't need extra windows, but I got a bunch. Some of the glass, though can be used to re-glaze the existing windows. Somebody want to build a greenhouse? Besides the aluminum windows there are loose panes of glass galore.

A shot toward the front of the trailer. More stuff. There are actually two small white chest of drawers there with drawers full of acorn shells some critter was filing away. There is also an old wooden desk standing on end that I'm hoping to re-claim for my computer desk. 


Well, that's the project. I'm hoping to have enough space I'll be able to retrieve everything from my storage unit and store or use here, plus enough space for bookshelves and computer desk for writing, drafting, and a bit of solitude. Hmm, maybe that's what this will be, my "Fortress of Solitude". Hey, Doc Savage and Superman had theirs, why not me?


We're sometimes a bit cramped in our house, so this will be my space. Actually, a large part of my storage unit is taken up with books, so if I can get my books up on shelves, that will be a large help. I'll keep you posted on my progress. Stay tuned!